S&S Die-Cast Rocker Cover Kit

Produced using the die-casting manufacturing process and then machined with computer controlled equipment. S&S die cast rocker covers include rubber O-ring style cover seals for leak-free operation. The proven two-piece design makes installation simple.

Features and benefits:

• Special rocker arm supports are included
• S&S rocker covers are finished with show-quality chrome
• Installation on stock and most comparable sized engines can be performed without removing the engine from the frame
• Clearance to permit valve lifts up to .640" using S&S valve spring packages and stock rocker arms or S&S roller rocker arms
• S&S rocker covers accept valve springs up to 1.660" O.D. without modification
• Exclusive one way valve built into the rocker cover gasket to control oil carry over
• Made in the USA

Kit contents:

• Front and rear covers
• All necessary gaskets and O-rings
• Mounting hardware
• Made in the USA

Notes:

• If using valve spring packages with taller than stock installed height, some minor clearance may be required.
• Cylinder heads must be set up correctly for high lift cams, and it remains the builder's responsibility to confirm all clearances.
• In most instances, only minor clearance is required to use S&S rocker covers with valve springs larger than 1.660" O.D.
• Made in the USA