Fits:
$359.96
Add to Cart to See Price
What is this? We've priced this item below what the manufacturer allows for public display, so you'll have to add it to your cart to view our final price.
Don't worry, if you decide not to buy this item, you can easily remove it from your cart.
The 509 Touring Cam is designed as a bolt-in, high torque cam. 180 psi cranking compression, no need for compression releases. For 88 CID engines with stock compression ratio. Idle-4500 rpm.
Can be used with stock valve springs.
It's no surprise that the S&S 551 cams for Harley-Davidson bikes have become a favorite with late model riders. The only problem is that, due to the .550" lift, the 551 cams can't be installed in Twin Cam 88 engines without also installing a set of high lift valve springs. That means that the heads would have to come off just to install a cam. That's a lot of work and added expense!
Based on the success of the 551 cams, S&S has come up with 509 bolt-in torque cams that work with stock valve springs in Twin Cam 88 engines. Like the S&S 551 cams, the 509 cams are great for low and midrange torque, but the 509 cam's lower lift allows them to be bolted into stock engines with stock valve springs. That saves a lot of time and money on the installation, which makes the S&S 509 a lot more attractive to owners of older Twin Cam 88 powered bikes.
Product Note:
| Specification | Details |
|---|---|
| Country of Origin | USA |
| Drive Type | Chain Drive |
| Engine Type | Twin Cam 88 |
| Exhaust Duration | 237 degrees |
| Exhaust Lift | .140 in. |
| Exhaust Lobe Center | 107.5 degrees |
| Exhaust Timing (Close) | 11 degrees |
| Exhaust Timing (Open) | 46 degrees |
| Intake Duration | 216 degrees |
| Intake Lift | .174 in. |
| Intake Lobe Center | 90 degrees |
| Intake Timing (Close) | 18 degrees |
| Intake Timing (Open) | 18 degrees |
| Valve Lift | .509 in. |
Fitment is guaranteed or your money back plus free return shipping.
Don’t waste time installing a product that doesn't fit. We worked hard ensuring that this product is an exact fit on the vehicles listed below.
By
Cory D.
on
Verified Purchaser
Put in my 2006 Electra glide ultra classic had 42K miles feels like a new bike also paired it with a dyno jet tuner. Can really feel the torque in the bike now pulling the hills here in the pacific north west.
By
Brian W.
on
Verified Purchaser
These are great cams for low to mid range power increase, and a nice lope at idle, but needed a fuel controller (tuner) to make it work right, true duals are next.
By
Jason L.
on
Verified Purchaser
Order my cams and had them in the same week.
By
Gary C.
on
Verified Purchaser
Easy install using adjustable push rods. Improved low-end torque and a much better sound.
By
Steven M.
on
Verified Purchaser
Great product.
How many stars would you give this product? Write a review.
By Bullseye
Can I use Stock solid pushrods with this cam ?
Answer QuestionYes, the 509C kit works with stock, or stock-replacement pushrods. Just be sure everything measures up appropriately!
By Anon.
Will the 509 cam work with a stock cam plate on 2000 fxd
Answer QuestionGiven that the 509 cams are rather mild in terms of lift, yes - they'll work just fine with the OEM FXD Harley-Davidson cam plates.
By randy j
Answer QuestionAbsolutely, yes. This Harley-Davidson aftermarket cam kit from S&S would be a great match for that particular big bore kit. Just be sure fuel delivery is matched so you get the best possible throttle response and power output from this cam upgrade.
By Anon.
Answer QuestionThe 509C is going to be a chain driven cam, like stock. The 509G cam will be a gear drive cam. S&S recommends using their adjustable push rods or Quickee push rods when using their cams.
By Anon.
Answer QuestionYes, you could removed the rocker box and arms in order to pull the push rods out to allow room for installation. This kit comes with new bearings for you to install as part of the job.
By Joshua P.
Answer QuestionYou do not need a new cam chain. You can simply reuse the cam chain with this kit.
By dave
Answer QuestionIf you would like to get the most out of the addition of those cams, I would recommend a tuner or to have your bike tuned professionally.
By Chris
Answer QuestionYes, if you were to choose the 1999 Harley Davidson FXD Dyna Super Glide 509C chain drive cams from our fit guide, you'd receive the correct cams to fit your machine. There's no need to purchase any gears or special valve springs to fit this to your bike since the .509" lift works with all remaining stock valvetrain components. Everything you need in one kit!
Have a question? Please ask our experts and customers who own this product.
