Acerbis X-Factory Handguards

So long as your bike has 7/8" or 1" diameter handlebars, yes, you can certainly fit these handguards to your IT200.

Yes, you can use these handguards on pretty much any machine with 7/8" handlebars, including the Kodiak 700. You may need to move some of the wiring around a bit to accommodate the clamps, but it's really no more difficult than attaching them to a modern dirt bike.

You can fit Acerbis X-Factory Handguards on pretty much any machine with 7/8" handlebars, including the 202 Brute Force 750. You may have to move some controls around in order to make way for the inner clamps, but otherwise, these fit a wide range of machines.

You can certainly fit these Acerbis handguards on that bike. The X-Factory handguards come with clamps that'll fit both, 7/8" handlebars like those fitted to your bike so you shouldn't have any problem fitting them to your machine.

These hand guards are a universal fit for models with 7/8" or 1-1/8" handlebars. You should have no problem getting them mounted to a Kawasaki KLX 140.

These Acerbis X-Factory Handguards are a universal fit. They included mounting hardware to fit 7/8" or 1-1/8" steel and aluminum handlebars. You should have no problem getting them installed on a Yamaha YFZ450R. You will likely need to adjust the controls to make everything fit correctly inside the hardguards.

So long as your machine is fitted with either, the stock 7/8" handlebars or a set of 1-1/8" handlebar,s the Acerbis X-Factory Handguards will fit the Kawasaki KLR650. You may need to move some controls a bit so as to make room for the KLR650 handguards from Acerbis, but otherwise, the provisions are certainly there. Just take your time, check that the brake and clutch levers can move freely along with verifying throttle movement and you're all set!

Yes, Acerbis X-Factory handguards will fit the Yamaha WR450F. These kits come with clamps and handlebar inserts that'll fit both, aluminum and steel handlebars with either 7/8" or 1-1/8" inner handlebar diameters. Everything you need to fit them is included in the box.

You can certainly fit these Acerbis handguards on the 990 Adventure. And it should be a snap since the bike comes from the factory set up with OEM KTM handguards. Like most Acerbis handguards, the X-Factory handguards come with clamps that'll fit both, 7/8" handlebars like those fitted to your bike, and also, 1-1/8" handlebars. You shouldn't have any problem fitting them to your machine.