Drag Specialties Voltage Regulator
By Willard O. on
Works very well
Fits:
$58.95 – $216.95
Product Note:
Specification | Details |
---|---|
Amps | Varies (make selection above) |
Color | Varies (make selection above) |
Engine Type | Varies (make selection above) |
Finish | Varies (make selection above) |
Harness Length | Varies (make selection above) |
Lead Length | Varies (make selection above) |
Material | Varies (make selection above) |
OEM Reference | Varies (make selection above) |
Quantity | Varies (make selection above) |
Voltage | 12V |
Fitment is guaranteed or your money back plus free return shipping.
Don’t waste time installing a product that doesn't fit. We worked hard ensuring that this product is an exact fit on the vehicles listed below.
By Willard O. on
Works very well
By Ryan S. on Verified Purchaser
Replaced my voltage regulator on my Harley 98 fxd. Worked perfect and got my bike back on the road. Fixed my problem with an over charging battery issue. Would buy again!
By Paul P. on Verified Purchaser
Worked perfectly.
By Delnor G. on Verified Purchaser
Fixed my issue.
By V. on Verified Purchaser
Good working part. Fins are coated black not aluminum as shown in the photo. No issues as a working electrical part.
By Jeffrey G. on Verified Purchaser
Works well with my Cycle Electric Stator. Charges just over 14 Volts and drops to 14 V when all my lights and stereo are on.
By William N. on Verified Purchaser
Product performed as advertised.
By Gene S. on Verified Purchaser
Works as it should.
By Samuel R. on Verified Purchaser
Right fit.
By Richard L. on Verified Purchaser
Exactly the one I need. Arrived in a few days. Overall great service from everyone at partsgiant.com
By Sho-Nuff on Verified Purchaser
Great voltage regulator for M8. Probably the best for M8 touring.
By Mark M. on Verified Purchaser
Got my charging system back up and running. Finned for cooling and fits perfectly.
By Steven W. on Verified Purchaser
Haven't had it long, but so far it's doing fine.
By Kona on Verified Purchaser
Did its job!
By John G. on Verified Purchaser
I ordered. It works.
By Jim D. on Verified Purchaser
Works great and looks even better. I definitely recommend this product.
By Javier V. on Verified Purchaser
Worked as described.
By Jacob M. on Verified Purchaser
What it was supposed to be.
By Carl W. on Verified Purchaser
Everything was just as it was to be. Regulator working fine.
By Kenneth S. on Verified Purchaser
Installation was easy and contained all necessary parts to make the proper replacement.
By Kenneth H. on Verified Purchaser
Fixed my charging problem works great. But not as pictured it’s all black not machined fins as shown or like OEM.
By Ken H. on Verified Purchaser
Works perfect, fixed my charging problem. Not as pictured, it’s ALL black not milled fins. Wanted as pictured to match old OEM regulator. 1994 Harley Davidson FXSTS Springer Softail
By Ken H. on Verified Purchaser
Picture shows machined edges black / aluminum fins the one I received is all black. It feels and looks like high quality materials and wires. It mounted right up and works like a charm. Idle at 13.5 volts a little more rpm and it’s a steady 14.2 volts. I’m very happy the VR fixed my charging issues. I was not looking forward to a stator and rotor replacement. Thank you. 1994 Harley Davidson FXSTS Springer Softail
By Phillip M. on Verified Purchaser
Worked perfectly on my 97 Heritage.
By Nick W. on Verified Purchaser
It wasn't the cheapest, and my battery hasn't blown up yet! So far it's doing its job.
By Justin L. on Verified Purchaser
Direct replacement, 14.5v steady at all RPMs.
By Stan P. on Verified Purchaser
Got my bike back on the road and the chrome replacement matches the oil filter. Best of all - no more P0562 code!
By mefford w w. on Verified Purchaser
Worked great.
By Stephen W. on Verified Purchaser
Bought a rectifier and it was self explanatory to install. The battery was dying while riding and after the new part I can ride for hours without getting scared that I’m gonna be stranded on the side of the road.
By Terry S. on Verified Purchaser
The item was as described with the exception that it didn't have the machined edge on the cooling fins, fit exactly and works great.
By Kevin P. on Verified Purchaser
Fit my 95 Electra glide perfect.
By Christopher B. on Verified Purchaser
Works great
By Gary F. on Verified Purchaser
Voltage regulator was great, works perfectly.
By Gary O. on Verified Purchaser
Works ok so far, but no polished fins on top.
By Ronald B. on Verified Purchaser
HD dealer told me 4 to 5 weeks for my voltage regulator, found this, 4 days later putting it on my bike.
By Arcides C. on Verified Purchaser
Was perfect fit.
By James T. on Verified Purchaser
Arrived quick easy install and work amazingly!
By Luke a. on Verified Purchaser
Just what i needed to fix my charging issue on my FXDLS, battery light came on and using my FP3 i saw my voltage was under 12V and dropping so the bike essentially killed my battery since it wasnt getting the correct current. Ordered this up, when changing it out this one feels heftier than the OEM one making that one feel cheap in comparison. It bolted tight up as its supposed to and worked like a charm.
By Justin R. on Verified Purchaser
Perfect replacement for the stock part. I originally went with an eBay special that burned up in two months and it never seemed like I was getting the needed power out of it. Great part for a great price.
By Rene F. on Verified Purchaser
Received my parts within a couple of days of ordering them. Exact match. Extremely satisfied!
By Jerry R. on Verified Purchaser
Fast shipping as always, good parts at a great price.
By PB on Verified Purchaser
Fast delivery, easy install so far so good
By fatboy68 on
Fast installation, couldn't be easier. High quality and voltage output is right in spec.
By Tee on Verified Purchaser
After a couple of other repairs to my little Red Sportster, the test ride proved a little hairy about dusk when she started sputtering. I had thought the light was not very bright and suddenly realized why. Turning off the head light wasn't the best idea that time of day but it got me home. This regulator showed up quick, same as the turn signal module I ordered same day. It fit perfectly with the proper length output wire. It even had a ring connector and shrink tube. I went with my own yellow ring Stakon but I appreciate that they included a connector if I had not had my own insulated one.
By Gary S. on Verified Purchaser
Received the Voltage Regulator when it was promised and it was packed nice and tight. Got it in perfect condition, put it on the Glider and it solved my electrical problem!
How many stars would you give this product? Write a review.
By Anon.
Answer QuestionIt depends on the type of LiFeO4 battery it is that you have. If it's a good one that has built-in battery management system, then you should have no problem using this R/R on your machine. We recommend you examine the battery that you have on your bike to be sure it doesn't have any special requirements. Generally speaking, if the battery works with the OEM regulator, then you shouldn't have any trouble with this, or any other replacement regulator that's built to provide power at the same specs as the OEM unit you're replacing.
By Anon.
I was just curious whether this regulator will work with an agm battery or if it is too low or high an amperage.
Answer QuestionDrag Specialties Solid-State Voltage Regulators are designed to work with any lead-acid battery fitted to any of the machines listed in our fit guide. This includes AGM-type lead acid batteries as well!
By Anon.
Answer QuestionYes, if you were to choose the 2001 Harley Davidson FXDL Dyna Low Rider Drag Specialties Solid-State Voltage Regulator from our fit guide, you'd receive the correct regulator to fit your machine. We have them in two different colors: black or chrome, to fit the style you prefer!
By Jeff
Answer QuestionYes, if you were to choose the 2013 Harley Davidson FLHR Road King voltage regulator from our fit guide, you'd receive the correct unit to fit your machine.
By Eli
Answer QuestionWithout knowing exactly what voltage regulators you're referring to, I can't say for sure what those differences could be. I can tell you that, these solid-state regulators from Drag Specialties provide a more consistent 12V power output than the stock unit on most bikes, or any other conventionally-gated aftermarket unit on the market. If you have a machine that's running a lot of aftermarket electrical parts, you can't go wrong with a solid-state regulator. As for fitment, if you were to choose the 1998 Harley Davidson FXD Dyna Super Glide solid state regulator from our fit guide, you'd receive the correct regulator to fit your bike. We guarantee it!
By Billy
Answer QuestionYes, we do sell a solid stator regulator for the 2007 Harley Sportster 883 Just choose the 2007 XL883 Sportster 883 from our fit guide and you'll get exactly what you need. We guarantee it!
By Wayne
Answer QuestionOne of the easiest ways to test your regulator/rectifier is to check the voltage at your battery terminals with the bike running. Simply start up the bike, rev it up, and the voltage should go up to 13.5-14.5 VDC. If you find that battery voltage is above or below that range by a few tenths, the regulator isn't working correctly. Your bike's service manual will also give you an exact test method as well as the exact acceptable voltage output ranges. If you don't have a service manual for your machine, we do have a variety of Clymer Shop Manuals on our website to help you determine how well your bike's charging system is work.
By Arlin
Answer QuestionDrag Specialties' Solid-State Regulators are covered by a one year manufacturer's warranty. If, at any time during that period you have a problem with the unit, just give us a call and we'll get you sorted out.
Have a question? Please ask our experts and customers who own this product.