These Quickee pushrods can be both installed and removed easily from an assembled engine. The S&S design permits a simple, trouble free installation that does not require removal of the gas tank, rocker assemblies, or even the rocker box cover! OEM pushrods may be cut to permit removal without rocker disassembly.
Threaded adjuster screws into the pushrod until the threads disengage and the adjuster simply slides into the pushrod, making installation or removal a snap
Once the pushrod is installed and adjusted, the locknut prevents the adjuster from moving
Adjustable to work with stock or aftermarket cams
Sold as a set of four
Made in the USA
Product Note:
Specification
Details
Country of Origin
USA
Engine Type
Varies (make selection above)
Length
Varies (make selection above)
Quantity
4
Size Over Standard
Varies (make selection above)
Vehicle Fitment
Fitment is guaranteed or your money back plus free return shipping.
Don’t waste time installing a product that doesn't fit. We worked hard ensuring that this product is an exact fit on the vehicles listed below.
Buell
X1 Lightning 1999-2002
X1W White Lightning 2002
Harley Davidson
CVO FXR2 1999
CVO FXR3 1999
FL 80 Electra Glide 1980
FLB Electra Glide 1969
FLD Dyna Switchback 2012-2016
FLDE Softail Deluxe 2018-2020
FLFB Electra Glide 1969
FLFB Softail Fat Boy 2018-2019
FLFBS Softail Fat Boy 114 2018-2024
FLH 80 Electra Glide Heritage 1981-1983
FLH Electra Glide 1970-1985
FLHB Electra Glide 1969
FLHC Electra Glide Classic 1979-1982
FLHC Softail Heritage Classic 2018-2021
FLHCS Softail Heritage Classic 114 2018-2024
FLHF Electra Glide 1970-1972, 1974
FLHF Electra Glide Sport 1975
FLHFB Electra Glide Super Sport 1969
FLHR Electra Glide Road King 1994
FLHR Road King 1995-2021
FLHRC Road King Classic 2007-2013
FLHRCI Road King Classic 1998-2006
FLHRI Road King 1996-2006
FLHRS Road King Custom 2004-2007
FLHRSI Road King Custom 2004-2006
FLHRXS Road King Special 2017-2023
FLHS Electra Glide Sport 1977, 1980-1993
FLHT Electra Glide 1982-1983, 1986-1987
FLHT Electra Glide Standard 1995-2009
FLHTC Electra Glide Classic 1983-2005, 2007-2013
FLHTC Liberty Electra Glide Classic Liberty 1986
FLHTCI Electra Glide Classic 1996-2006
FLHTCU Electra Glide Ultra Classic 2017-2019
FLHTCU Ultra Classic Electra Glide 1989-2016
FLHTCUI Ultra Classic Electra Glide 1995-2006
FLHTCUL Electra Glide Ultra Classic Low 2015-2017
FLHTCUTG Tri Glide Ultra Classic 2009-2016, 2023-2024
These S&S Quickie pushrods made my lifter swap a breeze. The 1/4" diameter on the adjustable part seems a bit whimpy, compared to other pushrods, but I'm not running race cams, so these should do the trick for my application. I trust the S&S quality 100%.
Great quality
By John D. on
Verified Purchaser
Can't go wrong with S&S. Great quality.
Highly recommend
By Thomas L. on
Verified Purchaser
Excellent product. Highly recommend
Very satisfied
By Alan P. on
Verified Purchaser
Very satisfied so far.
Very nice
By S. on
Verified Purchaser
Very nice, easy to adjust.
S&S Quickee Pushrods
By George E. on
Verified Purchaser
Works awesome.
Quickee pushrods
By Mark D. on
Verified Purchaser
Excellent product.
Best
By Robert M. on
Verified Purchaser
S&S is the best. Use their products on my Harley.
American Made
By Michael D. on
Verified Purchaser
The s&s quickee pushrods saves me a ton of work and money you can change the cam & lifters without tearing the top end apart saves time and money, great product.
Best adjustable pushrods
By Paul S. on
Verified Purchaser
Easiest adjustable pushrods I've found. When lock nut tightened have never had them loosen.
Great
By Jose on
Verified Purchaser
Great product, good value, real easy to install.
Nice adjustable pushrods.
By Rene P. on
Verified Purchaser
Awesome pushrods! Just keep in mind that on the M8, the factory tubes are too long to adjust properly, and to finish off, if you decide to go with the S&S pushrod tubes, make sure you get the kit with the tube keepers included. Factory keepers won’t keep the S&S tubes from leaking. I learned this the hard way. Learn from other’s mistakes, so you don’t have to.
Great pushrods
By Gerald B. on
Verified Purchaser
Really nice. Easy to use
Never a problem with S&S
By Chris S. on
Verified Purchaser
Anything S&S is really the best you can get. If you are changing your cam, quickee pushrods save a lot of time and if you don’t have valve issues or leaks then why mess with rocker boxes when their good? Be careful about cam timing and read the instructions that come with the pushrods.
The only criticism I have is the instructions cover too many models and can be a little confusing.
How many stars would you give this product? Write a review.
Do i need different covers for my 2016 dyna lowrider?
By Chris
Yes, you would need different pushrod covers in order to use these pushrods. They do offer these pushrods with a set of covers so you can get it all in one shot. Just search our website for S&S Quickee Adjustable Pushrod Kit with Covers.
will these fit my "17 M8 street glide and do I need the covers also
By bardo
If you were to choose the 2017 Harley Davidson FLHX Street Glide S&S Quickee pushrods from our fit guide, you'd receive the correct adjustable pushrods to fit your machine.
As for the pushrod covers, those are only required for 2007-2012 model year machines. Specifically, Evolution style pushrod covers are required if you wish to be able to adjust the pushrods easily on those machines.
So in your case, for a machine with a Milwaukee Eight engine, just choose your bike and you'll be all set. There's no need to buy a set of pushrod covers to install these on your machine.
i have a 1997 harley low rider fxdl are the stock tube covers used when installing the s&s quickie pushrods
By Richard S.
Yes, S&S Quickie Pushrods for the 1997 Harley FXDL Dyna Low Rider are indeed compatible with the OEM pushrod covers. The stock tube covers will fit just fine.
I have a 97 heritage do I need different covers or can I use the stock pushrod covers??
By Anon.
S&S Quickee Pushrods for the 1997 Harley Heritage Softail are designed to work with the stock pushrod covers. There's no need to purchase a special set of covers just to fit these to your machine.
Do you have a set or will these pushrods fit a 1998 Harley Davidson FLHTCI Electric Glide Classic
By TDUB4DUB
Yes, these pushrods will indeed fit your machine. Just select the FLHTCI Electra Glide Classic from our fit guide and you'll get a set of pushrods that'll fit your machine.
Do I need different push rod covers for my 2003 Ultra Classic Harley-Davidson
By Clyde M.
It's a twin cam, 88 inch motor
Yes, you will need a set of 1984-1999 style pushrod covers in order to install the Quickee set on your bike. Those covers can be found on our S&S Pushrod Tube Kit web page. Better yet, you can get the complete kit, with everything you need for your bike in the form of a S&S Quickee Pushrod Conversion Kit. It's a lot less expensive to get the entire kit and you don't have to worry about getting anything else.
I have a 96 sportster 1200 xlh. According to the info on these quickee pushrods I can use my factory pushrod tubes. I am unclear how that is possible. These are a one piece cover with what seems to be very little room for removal much less getting a wrench past to make an adjustment on the push rods. Can you please explain how this works? Are there 2 piece covers available for the sportster?
By James
You're correct in that, Xl models do require two-piece S&S Pushrod Tube Kit to be able to install and use the Quickee push rods. We have pushrod tubes available in the form of an S&S Pushrod Tube Kit or a Drag Specialties Pushrod Tube Kit.
Verified Purchaser
