S&S Power Tune Duals will add horsepower when compared to your stock header pipes. They have an independent dual look with hidden crossover and updated styling gives your bike a modern look.
Other Features:
Moves the rear cylinder header under the bike to reduce radiated heat to the passenger
Heat shields with 220 degrees of coverage
Oxygen sensor bungs
Durable 16 gauge construction
Spherical inlet design for improved sealing and exhaust gasket durability
Hardware included to mount crossover pipe
Sold as a set
Made in the USA
Product Note:
Specification
Details
CARB Approved
No
Color
Varies (make selection above)
Configuration
2-into-2
Country of Origin
USA
Exhaust Diameter
1-3/4 in.
Finish
Varies (make selection above)
Heat Shield Included
Yes
Material
Steel
Vehicle Fitment
Fitment is guaranteed or your money back plus free return shipping.
Don’t waste time installing a product that doesn't fit. We worked hard ensuring that this product is an exact fit on the vehicles listed below.
I was looking for these specific pipes and found them.
Header pipes
By Keith G. on
Verified Purchaser
Just what I needed.
Great headers!
By T. on
Struggled with a couple of the Chinese knockoff true duals but the fit was never right. Got these S&S headers and am much happier. Preferred the cross over under the bike rather than the exit from the back cylinder to the left muffler. Using 18mm wide band O2 sensors with a ThunderMax tuner works perfect with no interference. Only change that I made was adding 1/4" spacers between the right floorboard and the frame to provide clearance for the front pipe. Great product, improved sound and performance on my 2008 Ultra Classic!
S&S pro tune headers
By Cody O. on
Verified Purchaser
This header is awesome! Keep in mind this package does not include slipons. Regardless with s&s headers and the slipons you chose your bike will sound amazing!
Awesome
By Anthony F. on
Verified Purchaser
Exactly what I needed at a great price. Customer service contacted me about a address issue and they were very helpful and quick to respond.
Great looking and sounding header
By Howard F. on
Verified Purchaser
This was my 1st ever header install, everything I needed was in the box, good instructions. I will say it was not as easy as I had hoped but if you take your time anyone can do it that has some mechanical experience, great looking and sounding header.
Excellent
By Jon S. on
Verified Purchaser
I installed this header pipe on my 08 road glide with 110ci motor build and this pipe fit perfect and looks great on the bike. Fit and finish was excellent. This a 2-1-2 type header pipe good for big motor builds.
Good
By Larry P. on
Verified Purchaser
Good price, only problem no plugs for top bungs and no instructions. Will use parts giant again.
Power Tune Duals
By Todd S. on
Verified Purchaser
A great part at an ok price!
S&S Power Tune Duals
By Robin B. on
Verified Purchaser
Very pleased with the product quality in both fitment and finish. Header pipes are solid with clean welds, the chrome heat shields are excellent and quite thicker than the stock HD heat shields. Installation on the '16 Road King went without a hitch, just make sure you mock up the fitment positions and watch a few you tube installation vids. One hint is loosen or remove the right side upper bag guard, it helps when levering the header portion into place. The "P" clamp is a little wonky getting it spread enough to go over the O2 bung but other than that installation was straight forward. The overall sound is much better, being deeper and throatier than stock. Excellent investment to "open up" the fuel & exhaust when also adding an open air filter, Fuelpak3 and performance exhaust cans (Rhineharts).
S&S tune duals
By Michael E. on
Verified Purchaser
Yes I ordered the S&S exhaust system and it met all my expectations. The kit had all parts and pieces and clamps. All pipes and heat shields fit perfectly along with 02 oxygen sensors. It made a huge difference on the performance the neighbor haters mufflers came to life. Thanks!
SNS headers
By Rhea L. on
Verified Purchaser
The SNS headers were just what I needed on my bike, it opened it up and made it sound a little better and get rid of some of the heat by our legs and they were easy to put on, they were just what I expected.
Great buy
By jack d. on
Verified Purchaser
My bike is less hot while riding and the black looks great.
Excellent product and price.
By Brian on
I had many options but went with S&S headers. 100% satisfied. Very complete set, easy to install and looks beautiful.
The price was right at Partsgiant, couldn’t find it less expensive anywhere.
Great sound, looks, performance, and heat reduction
By Andrew L. on
I decided to swapped out my factory head pipe in an effort to reduce heat that is inherent in some of the pre 2009 models . This S&S pipe looks and sounds great. I can definitely notice the heat issues being greatly reduced. I can't give any installation advice as my local bike mechanic put these on, but didn't hear any complaints. The boost in performance is definitely noticable. I thought I might lose ground clearance but noticed no difference from the stock pipe.
Sweet Set of Pipes!
By PJ R. on
These pipes are great! They brought my 03 Road King Classic to life...I matched them up with a set of Vance & Hines mufflers and the combination has a sweet spot like no other. Very satisfied with the sound and performance!
S&S Power Tune Duals Header Pipes
By Anon. on
I think these pipes are some of the nicest on the market. I was told no one makes a 2 into 1into 2 header for my '03 Road King. Only complaint: the clamps that hold on The shielding are kind of flimsy. It's a shame a couple of 50 Cent clamps prevent this from getting a five star rating across the board.
How many stars would you give this product? Write a review.
Maybe, it depends on what size the threads on the O2 sensors you have, use. If they're the same size as the stock oxygen sensors, then they'll bolt right in. All all S&S pipes come with bungs that'll fit the OEM Harley-Davidson oxygen sensors (if factory-equipped as such) to make re-using those sensors easy.
Yes, if you were to choose the 2007 Harley Davidson FLHTCU Ultra Classic Electra Glide headers from our fit guide, you'd receive the correct parts to fit your machine.
Harley dropped the "I" suffix on their model names after the 2006 model year since all of their bikes went with fuel injection from that point on. It is for that reason you don't see that I suffix anywhere in our fit guide for 2007+ model year bikes.
You won't have any problems fitting these headers to your bike!
In the case of the '13 Road King, the same headers fit both the base, and CVO models. Just choose the 2013 FLHR from our fit guide and you'll be all set!
What mufflers work? You provided two different answers.
By Anon.
You provided two different answers as to what mufflers will fit. In one you said any that bolt up to OEM exaust. In another you state that any for a 2017 or newer M8 will not...so which is it? I have a 2018 Road Glide Special with CFR mufflers and OEM headers.....will this work or not? Many people I am sure are confused by this.
S&S currently only produces these header pipes to accept 1995-2016 style mufflers. If you have a 2017-2019 M8 touring model you must use older style 1995-2016 slip-ons with this header. The current slip ons you have that fit factory M8 headers will not work with any headpipes offered from S&S at this time. This is a retrofit style with matching 1-3/4" headers left to right. This is to provide more options for mufflers as there are currently more muffler designs for the 1995-2016 than are offered for 2017-2019 Touring at this time. If you wish to retain your CFR mufflers for a 2017-2019 Touring I would suggest looking at the Cobra Pro Chamber Head Pipes or Vance & Hines Power Duals Head Pipes both accept M8 style aftermarket slip-ons. The Bassani pipes we have as well are a retrofit style to the older 1995-2016 pipe.
Is everything needed for mounting and attachment included?
By Gerhard L
Everything needed to install these pipes on the model selected at checkout will be included with this pipes. Keep in mind if purchasing for newer 2017-2019 Harley-Davidson touring models, you must use 1995-2016 Slip-ons. They are not compatible with Stock or aftermarket M8 Slip-ons.
do the pipes conect together like an x pipe before the cross under
By phillip d
Yes, there is indeed a connection between the front and rear headers before the front cylinder's pipe crosses under the frame to the left side. In this way, you get the looks of a true dual exhaust with the performance near that of a two-into-one design!
Will I have to remap after the install of these headers
By Glenn W.
Yes, it's always recommend that your bike be remapped upon the installation of any header kit as the difference between stock exhaust flow and the new headers is rather significant. if your bike is fuel-injected, we recommend a Cobra Fi2000R fuel tuner for the task. It's simple to install and can be adjusted in minutes via one of the three tuning knobs located on the device. It's akin to setting up a carburetor in that you have a low, mid and high adjustment. Plus, the included instructions explain exactly how to configure the tuner based upon how your bike reacts to the new exhaust installation.
I am wanting to order a set for a 2002 Ultra Classic FLHTCUI, and am going to install a Power Commander V, with the Auto Tune, which uses the O2 sensors for fuel mixture reading.....do these come with the bungs and plugs for applications that do not require O2 sensors, or no bungs for the models of motorcycle years that do not have O2 sensors?
S&S' Power Tune headers for the FLHTCUI come equipped with oxygen sensor ports. And, should you choose not to run them on your machine, there's also a set of plugs included in the box. In this way, you've got everything you need to replace the headers on your bike with no need to purchase any additional equipment to finish the job.
Will these fit my 2016 H-D ultra limited (FLHTK) ?
By Anon.
Yes, we do indeed have S&S Power Tune Dual header pipes available to fit the 2016 FLHTK Electra Glide Ultra Limited. Simply choose your machine from our fit guide, and we'll get the correct unit on its way to you, quickly. The nice thing about S&S Power Tune dual header exhausts is that they'll bolt up to pretty much any aftermarket Harley-Davidson slip-on mufflers you can find that fit the OEM headers. They give you quite the variety from which to choose from when tricking out your bike!
I have 3" or 3-1/2" Rhine Hart mufflers will they fit?
By Anon.
I have
S&S Harley-Davidson headers are designed to work with any aftermarket Harley slip-on exhaust that fits the OEM headers. That is to say, if the Rhinehart mufflers you have fit the stock headers, they'll also bolt straight onto the S&S headers. This is due to the fact that the S&S headers have the same outlet diameter and are positioned in the same sport as the stock headers.
There are no exhaust gaskets included with any of the exhausts that we sell. Provided the OEM exhaust port gaskets are in good condition, you can certainly re-use those. Otherwise, we do have a wide variety of exhaust port gaskets available in our store.
Can I used the mufflers that I already have on the bike?
By Anon.
S&S headers are compatible with all slip-on mufflers that fit the stock headers. Provided the mufflers you have on your bike fit the stock headers, you should have no problem mounting them to these S&S Power Tune Duals headers.
these will only accept the 1995-2016 mufflers, will not work with 17 and up style
Verified Purchaser
