Cobra Floorboards
By Brian S. on Verified Purchaser
Looks great and feels much better than the pegs.
Fits:
$315.32 – $379.27
Cobra's floorboard kits let you remove those stock, put your feet here pegs and fit functional and stylish floorboards instead.
Product Note:
Specification | Details |
---|---|
Country of Origin | USA |
Finish | Chrome |
Material | Steel |
Position | Driver |
Quantity | 2 |
Warranty | Lifetime Manufacturer Warranty |
Fitment is guaranteed or your money back plus free return shipping.
Don’t waste time installing a product that doesn't fit. We worked hard ensuring that this product is an exact fit on the vehicles listed below.
By Brian S. on Verified Purchaser
Looks great and feels much better than the pegs.
By Anthony S. on Verified Purchaser
Perfect fit. Easy install.
By Jay B. on Verified Purchaser
Fit well and high quality. Easy to install
By Tommy R. on Verified Purchaser
I absolutely love these Cobra floorboards. They were easy to install and are very comfortable.
By Thomas P. on Verified Purchaser
Love these, highly recommend. The brake pedal side came really close to the exhaust so I put some washers between the frame and the mount, worked out fine. So much more comfortable than the stock pegs. You're not tensing your legs all the time, you can relax and ride. by the way I'm talking about a 2022 Honda Shadow Phantom 750. Also got the Cobra square sissy bar and tubular luggage rack. Lovin' those too. I am sold on anything Cobra makes. All were easy to install and look and function fantastic. Thanks Cobra!
By Richard L. on Verified Purchaser
Been using them for years and they're just like brand new still.
By Tim G on
Perfect! The fit was right on the money. No issues with installation at all. I'm always a little surprised when things work like they should. These do!
By Matt L. on Verified Purchaser
Perfect fit. A little pricey but you get what you pay for.
By Don G. on Verified Purchaser
A little pricey but very nice.
By Julio F. on Verified Purchaser
I like the comfort of the floor boards over the pegs. It's better to sit at a 90 degree angle for the hip as per my doctor anyway. These are to replace my older ones that got bent by a car trying to pass me on my lane? We all know about those things that happen to the bike riders. But I will also want to let know of the shifter bolt they give you might be a little shorter than the original and should be installed from the bike side to the shifter because the bolt won't go past the hardware under the floorboard on the shifter side for the shifter. And it might be shorter than the original bolt, so don't forget the thread locker liquid for the bolt. I like that they have that on the bolts given with the hardware. Would also like to add that these start with a little rust after a year. Might want to keep the hardware a little greased under the floorboards. thanks
By LeRoy F. on Verified Purchaser
Been riding for over 50 years, had every bike you could think of. Had to downsize to a lighter bike due to bad knees. The boards are a little pricey but you get what you pay for. Solid heavy construction because you know you'll have to stand on them every once and a while so you don't get punted off the seat. Don't trust ebay junk with your life, easy install.
By Scott R. on Verified Purchaser
They look great and are very comfortable on long rides. The only issue is the instructions say to use the small nut and bolt to attach the right side. You can't on my model, you have to use the OEM pin and a cotter pin otherwise no issues. Happy Riding
By Angelina A. on Verified Purchaser
Was exactly what I wanted.
By Valerie H. on Verified Purchaser
Cheaply made. 1996 Honda VT1100C2 Shadow 1100 A.C.E.
By Alvin H. on Verified Purchaser
Perfect fit, easy 25-30 minute installation including time gathering and putting away tools. Also, they look great on my 2009 Honda Shadow Aero. A little pricey, but you get what you pay for, excellent quality. I highly recommend.
By Edward F. on Verified Purchaser
Great floorboards. Very sturdy and great chrome. Good value and ease of install was a plus.
By Jonathan I. on Verified Purchaser
Well worth the money. I originally purchased a cheap pair off EBay and returned them for these and it was the best choice ever. These are next level over all the cheaper alternatives out there!
By George T. on Verified Purchaser
Very nice floorboards. Much easier to use than pegs. Cobra makes quality products.
By Leo W. on Verified Purchaser
Wow what a difference. What I found really nice was not having to extend my legs as much when I didn’t want to, plenty of board space to let the feet come back almost to a mid control position and offer that perfect sweet spot to keep the blood flowing and legs from cramping up on those long rides yet allows you to really extend and get that stretch too. These boards are really nice. Well made and fit right on. I suppose if I had done it once or twice I could do it in maybe 5-10 min per side. Chasing the tools, getting the chair out, etc. it took about 15-20 per side. I had to muscle with the brake pedal hole for a couple of minutes to line it up with the new bolt but that was the most effort other that unpacking the bubble wrap. Great product, very pleased. A+++
By Braden F. on Verified Purchaser
Parts Giant: A+, very fast shipping. Cobra: B-. I purchased these for my 2006 Honda Shadow Spirit. Pros: The floorboards look great, and my ride is much more comfortable now. Cons: You must use your existing bolts to attach them, and there is much less threading holding the floorboards to the bike frame because you must use the included spacers (I'm hoping the floorboards don't fall off). I wish Cobra had included longer bolts in this package rather than using the stock bolts. That being said, these are a great accessory to add to your motorcycle.
By Mark C. on Verified Purchaser
Easy install
By Stephanie on
I am so happy with this purchase. My feet are so much more comfortable riding long rides. They were so easy to install. I would recommend to everyone.
By Wess I. on
Love the look of these boards. I have knee problems that give me issues on longer rides and these help relieve the pain. Install wasn't too bad but did need to get some extra help to loosen stock pegs and then tighten the new bolts on.
By Noah F on Verified Purchaser
Easy to install in just minutes. Everything fit perfectly. All I need now is a heel-toe shifter and I'll be set to go!
By Joshua on Verified Purchaser
Ordered the Cobra floorboards for my 1999 Honda Valkyrie..incredible improvement ..and the quality was above my expectations..show quality finish. A perfect fit for my bike. Seemed a little pricey..but when I opened the package( that arrived in less then 2 days) I could see they were worth every penny.
By Dusty on
Great floorboards
By Anon. on
Perfect, bolted right on, great for the old feet
By Paul on Verified Purchaser
I could not be happier with this purchase. Ordering through parts giant was super easy and the free shipping was a major plus to this purchase. Also the fact they guarantee the fit to my bike is great. Install was super easy and quick didn't run into a single problem. Definitely make riding more comfortable and have better control of the bike. If you are unsure about getting a set of these don't you will love them.
How many stars would you give this product? Write a review.
By DM Kitty
Answer QuestionAccording to the installation instructions, there is no other parts/pieces needed to allow installation of these boards on that 2004 Honda Sabre 1100.
By Eric S.
Answer QuestionYes, if you were to choose the 2006 Honda VT1100C2 Shadow 1100 Sabre floorboards from our fit guide, you'd receive the correct floorboards to fit your machine.
By Vic
Answer QuestionIf you were to choose the 2010 Honda VT1300CRA Stateline ABS floorboards from our fit guide, you'd receive the correct parts to fit your machine. The ABS variant requires no permanent modifications in order to fit the floorboards. Everything you need to get the job done is included in the box and you'll only need a simple set of metric hand tools to finish the job.
By John
Answer QuestionNo, there's no need to replace or otherwise permanently modify the foot controls on any machine for which we list these floorboards to fit. They bolt in place of the stock footpegs or floorboards with ease.
By Stephanie
Answer QuestionYes, if you were to choose the 2007 Honda VT750DC Shadow 750 Spirit floorboards from our fit guide, you'd receive the correct floorboards to fit the chain-drive Shadow 750 Spirit.
By Shylasrock
I have a 2016 Honda Aero and purchased Cobra Floorboards. Both clutch and brake side are too close to the shifter peg and rear brake pedal. What is a cure if no adjusters are available?
Answer QuestionCobra floorboards are all fixed in position. You may want to adjust your shift lever where it is splined to the shift shaft and the brake arm can likely be adjusted by adjusting the pushrod for the master cylinder or linkage.
By Tom
Answer QuestionCobra does not currently offer any floorboards that are compatible with Triumph models at this time.
By Professor X
Ordering the passenger boards and wanted matching driver boards
Answer QuestionCobra currently only offers the passenger boards for the 2006 Kawasaki VN1600D Vulcan 1600 Nomad as it came stock with driver floorboards.
By John
I have a 2001 Suzuki VL800 Volusia that these fit but I'm looking for a set of floorboards that I can adjust the foot angle up or down and the height up or down.
Answer QuestionThese Cobra Floorboards are non-adjustable. They are solid mounted to the frame with the provided brackets. They will pivot up if they were to make contact with the ground while leaned over in a turn, but cannot be adjusted for height or angle. Unfortunately, Cobra does not produce any adjustable floorboards for the 2001 Suzuki VL800 Volusia 800 at this time.
By Francisco N.
without modifications on the bike?
Answer QuestionYou can install these floorboards on any machine listed in our fit guide without issue. All Cobra floorboards are designed to bolt in place of the stock foot controls and come with everything you need for fitting them to your machine without making any permanent modifications to your bike. And, the included instructions explain clearly what needs to be done. If you're comfortable with doing an oil change on your bike, then putting these floorboards on will be no problem!
By Anon.
Answer QuestionYes, we do have Cobra driver floorboards available to fit the 2007 Honda Shadow Spirit 750. Just choose the 2007 Honda VT750C2 Shadow 750 Spirit floorboards from our fit guide, and you'll be all set!
By Jerry
My left stock peg bracket has a docking place for shift lever to mount into.
Answer QuestionThere's a provision in the floorboard kit to accommodate the OEM shift lever on the Shadow Aero as these kits are specifically designed to work with the stock foot controls. A bolt and washer is included to facilitate the installation of the shift lever with ease. Considering your bike's foot controls are stock, you should have no problem fitting these floorboards to your bike.
By Anon.
Answer QuestionYes, all Cobra Driver Floorboards come with the requisite mounting hardware along with easy-to-understand installation instructions. There's no need to buy any additional parts to fit these floorboards to your bike's stock driver foot controls. As far as fitting a single kit to the two different machines you have, the mounting scheme for each bike is different. Consequently, you'd have to purchase both, a Honda Shadow ACE Tourer floorboard kit and a Honda Valkyrie floorboard kit in order to fit both of those bikes with Cobra floorboards. One kit cannot be interchanged between the two bikes.
By Hunter
Answer QuestionYes, this floorboards will indeed fit the 2015 Shadow Phantom. Just choose the 2015 Honda VT750C2B Shadow 750 Phantom from our fit guide and we'll send the proper driver floorboards to fit your machine!
By LIL Bit
Will these fit on a 2003 Honda Shadow Spirit 1100, & does it come with the hardware to install them ??
Answer QuestionIf you were to choose the 2003 Honda VT1100C Shadow 1100 Spirit from our fit guide, you'd receive the correct driver floorboards to fit that machine. All required installation hardware is included in the kit along with a set of easy-to-follow instructions. You will, however, need to re-use some of the OEM foot control components in order to complete the installation. So long as you have that, with the kit - you'll have everything you need to add a really nice set of floorboards to your bike.
By gerald
Answer QuestionCobra no longer produces driver floorboards for the 2009 M109R. But don't worry! If you were to order a set of Kuryakyn Footpeg Adapters for the driver position, you could add a pair of Kuryakyn Premium Mini Boards to fit your bike. Plus, with those boards, you'd be able to angle them specifically for your needs since the spline shaft allows you to tilt the boards for a perfect fit.
By Joe
Answer QuestionYes, Cobra does produce a set of driver floorboards to fit your machine. Just choose the 1999 Honda VT750C Shadow 750 (if chain driven) or the 1999 Honda VT750CD Shadow 750 A.C.E. (if shaft driven) from our fit guide and we'll get the correct set of floorboards to fit your machine on their way to you. What's particularly nice about these floorboards from Cobra is that they include all the required hardware to complete the installation on your bike. There's no need to buy any extra parts.
By deeppockets
Answer QuestionIf you're referring to the Cobra Drag Pipes 6-into-6 Full Exhaust System for the Honda Valkyrie, yes - these floorboards will indeed fit without issue. Cobra has always done an excellent job of making sure their floorboards work with their Honda Valkyrie exhausts.
By Anon.
Answer QuestionIn the case of 2001 Shadow 750 ACE floorboards, the kit comes with left and right floorboard assemblies and the bolts for attaching it. You are to re-use the OEM brake and shift levers, so you won't have to change either of those. Though, one thing you will want to be careful with is how both of those levers are adjusted. If they're still in the stock position, you should be all set. If you've ever adjusted their positions for any reason, you will need to check to be sure of proper clearance, but you won't have to replace them.
By mrgeoff
I have a 1999 Valkyrie Tourer CT with stock exhaust and a Heel / Toe Shifter. Will this fit my bike?
Answer QuestionCobra Driver Floorboards that fit 1999 Honda GL1500CT Valkyrie Tourer will bolt straight onto the Valkyrie with no permanent modifications. The included Cobra floorboard instructions explain everything you need to know about getting them set up perfectly for your needs. Best of all, there's no need to purchase any additional hardware to fit them to you Tourer GL1500CT - it's all in one box!
By Anon.
Answer QuestionUnfortunately, Cobra does not produce any floorboards to fit Honda Gold Wing models. We do have some nice Gold Wing driver floorboards in the form of Parts Unlimited Engine Guard Cruise Boards. Those boards will bolt straight up to 1991 through 1997 model year Honda Gold Wing Interstate models with ease.
By Mac
Answer QuestionYes, these Cobra Passenger Floorboards will indeed fit the 2006 Honda VTX1300C. Just select your make, year and model from the drop down fit guide that's immediately to the right of the main image and we'll get the correct floorboards to fit your machine on their way to you, fast!
By Ken
Answer QuestionYes, these Cobra driver floorboards will indeed fit the 1995 Honda Shadow VT1100 ACE.
By Dennis
Answer QuestionYes, these driver floorboards will indeed fit the 1999 Honda Valkyrie Interstate without requiring any permanent modifications to your bike. All of the first-generation Valkyrie models use the same floorboards from Cobra.
Have a question? Please ask our experts and customers who own this product.