Free Shipping.

Expert Service.

Call 888-575-6570

Progressive 422 Series Adjustable Shocks with RAP

(3 reviews)

Item: 324859

$749.99 – $750.95

Select Your Vehicle - Fitment Guaranteed

Progressive 422 Series Adjustable Shocks with RAP


Shocks hidden under the frame make common adjustments difficult on the Softail chassis. Not anymore! RAP (Remote Adjustable Preload) combines high performance shocks with a remote preload adjuster. Conveniently located behind the left passenger peg, the RAP system allows for easy tuning of the shocks to account for changing loads or the addition of a passenger.

  • Chrome plated
  • Ability to lower rear of bike from stock to -2" lower than stock
  • Preload adjustable
  • High pressure gas charged monotube for consistent damping performance
  • Available with standard or heavy-duty spring rates
  • Sold in pairs
Specification Details
Finish Chrome
Length Varies (make selection above)
Quantity 2
Spring Rate Varies (make selection above)

Vehicle Fitment


Fitment is guaranteed or your money back plus free return shipping.
Don’t waste time installing a product that doesn't fit. We worked hard ensuring that this product is an exact fit on the vehicles listed below.

Harley Davidson
  • FLS Softail Slim 2012-2017
  • FLSS Softail Slim S 2016-2017
  • FLST Heritage Softail 1989-1990, 2006
  • FLSTC Heritage Softail Classic 1989-2017
  • FLSTCI Heritage Softail Classic 2001-2006
  • FLSTF Softail Fat Boy 1990-2017
  • FLSTFB Softail Fat Boy Lo 2010-2016
  • FLSTFBS Softail Fat Boy S 2016-2017
  • FLSTFI Softail Fat Boy 2001-2006
  • FLSTI Heritage Softail 2006
  • FLSTN Heritage Softail Nostalgia 1993
  • FLSTN Heritage Softail Special 1994-1996
  • FLSTN Softail Deluxe 2005-2017
  • FLSTNI Softail Deluxe 2005-2006
  • FLSTS Heritage Springer Softail 1997-2003
  • FLSTSB Softail Cross Bones 2008-2011
  • FLSTSC Softail Springer Classic 2005-2007
  • FLSTSCI Softail Springer Classic 2005-2006
  • FLSTSI Heritage Springer Softail 2001-2003
  • FXCW Softail Rocker 2008-2009
  • FXCWC Softail Rocker C 2008-2011
  • FXS Softail Blackline 2011-2013
  • FXSB Softail Breakout 2013-2017
  • FXST Softail 1989-1990
  • FXST Softail Standard 1999-2009
  • FXSTB Softail Night Train 1999-2009
  • FXSTBI Softail Night Train 2001-2006
  • FXSTC Softail Custom 1989-1999, 2007-2010
  • FXSTD Softail Deuce 2000-2007
  • FXSTDI Softail Deuce 2001-2006
  • FXSTI Softail Standard 2001-2006
  • FXSTS Springer Softail 1989-2006
  • FXSTSB Softail Bad Boy 1995-1997
  • FXSTSI Springer Softail 2001-2006

Customer Reviews

Write Review

The best upgrade for a softail

By   on  Verified Purchaser

At this price, it was time, and frankly wish I had the scratch long ago. The 422 series made my 1988 softail ride like a new M8. Very worth it. A word of advice: If you are not a mechanic, this is one job best done by one. Dial the rebound in correctly and enjoy. No more "bottom-out" and the tracking in the turns is MUCH better. Note: have your bike on a motorcycle lift, pull the rear wheel, do the job right.


Good but expensive

By   on  Verified Purchaser

So far so good. They seem extremely well made. It's nice to be able to make adjustments without having to put the bike on any kind of support. It is expensive though. That's always an issue for many of us.


Worth it!

By   on 

Great shocks at a great price! These have been great on my Fat Boy.


How many stars would you give this product? Write a review.

Write Review

Questions & Answers

Ask Question

Do I have to use the spanner wrench when adjusting load

For these shocks you would use the remote adjuster that is included in order to change the preload setting.

By Andy
Answer Question

Standard or Heavy Duty 422. I ride solo roughly 80% of the time, weigh 210 lbs, wife is 130 lbs.

I ride solo roughly 80% of the time, weigh 210 lbs, wife is 130 lbs... which version is best suited for these conditions.

With being right on the edge of deciding point of heavy duty or standard, I would suggest the heavy duty as you can always back down the preload if they are too stiff when riding solo.

By Andy
Answer Question

what type spring do I need standard or heavy duty

Choosing the right spring rate will make a big difference in how your bike responds to a Progressive suspension upgrade. Heavy-duty springs are best suited for solo riders over 220lbs. If you ride two-up and/or with a full load of luggage at least 50% of the time, heavy-duty shocks are also recommended. Otherwise, standard-rate springs will do the trick.

By Staff
Answer Question

Do these raise the bike up?

I am 6'5" weigh 230. I only ride solo on my softail springer. The previous owner was short. Will these shocks raise the bike up?

If the shocks on your machine are stock, and you're riding an 1989-1999 Softail, the shocks measure 12.23" long at full extension. If you're riding a 2000-2017 Softail, the shocks measure 10.65" long. You'll be able to take two inches out of that should you want to lower the rear end of the bike.

By Staff
Answer Question

Does it matter which side you put adjusting side with remote control

Does it matter which side you put adjusting side with remote control also my weight is around 210lb

The side on which the preload adjust varies based on the model year machine on which you're fitting the shocks. In the case of 2000+ models, the preload adjust is to be fitted on the left side of the bike. On old machines, Progressive instructs you to install the adjuster on the right side of the bike. As for the spring rate recommendation, if you ride solo at least 50% of the time, go with the standard rate springs. If you ride two-up and/or with a full load of luggage at least 50% of the time, heavy-duty shocks are what's recommended for your situation.

By Staff
Answer Question

I'm 6'6" and 350lb I do ride 2up allot is this shock right for me or is there something else?

Heavy Duty spring rate would be the best option to suit your weight in the 422 series Shocks to fit a Harley Davidson Softail model. Heavy Duty spring rate is recommended for anyone that rides 2-up more than 50% of the time or has a combined rider weight with gear that is over 250 lbs. I would also suggest looking at a set of heavy duty fork springs for the front forks as well. This will give you the best ride quality matching both front and rear suspension together.

By Staff
Answer Question

does one or both shocks adjust? Pic only shows one cable or hose connected to one shock

How does that work connected to only one shock?

The Remote Adjustable Preload (RAP) function is there to fine-tune ride height once you've got your baseline ride height properly set. With careful tuning, you can get the shocks set up so that, depending on whether or not you're riding with a passenger - you can simply turn the RAP's knob a few times to get the proper ride height. You can do this since the shock that doesn't have the remote adjuster attached can also be adjust for preload using the included preload adjustment tool. In the instance you're unable to get proper ride height with the RAP alone during initial setup, then you will need to use the preload wrench to get it in range. For reference, it's actually not unusual to find modern suspension components with a preload adjustment on one side only. For those bikes, you often need to change out the springs in order to get the proper ride height. This goes for forks as well. While it's not as common on cruisers, over the last four or five years, it's become increasingly common on sportbikes and offroad bikes, both - MX and enduro machines. What's nice about the Progressive 422 shocks is that, since the non-remote adjustable side can also be adjusted for preload, you don't need to change out springs in order to get the right ride height.

By Staff
Answer Question

do you have black?

Progressive's 422 series shocks are only available with a chrome finish.

By Staff
Answer Question

Have a question? Please ask our experts and customers who own this product.

Ask Question