Fits:
$1127.93
Honda's incredible six-banger Valkyrie remains unchanged and totally unrepentant. The Gold Wing-derived engine, all six cylinders and 1500cc of it, remains strong as an ox. Better yet, you can make it all the more potent with one of Cobra's precision engineered exhaust systems. All Cobra systems are designed for effortless installation.
Product Note:
| Specification | Details |
|---|---|
| Baffles Included | Yes, Removable |
| Configuration | 6-into-6 |
| Country of Origin | USA |
| Exhaust Diameter | 2 in. |
| Finish | Chrome |
| Heat Shield Included | Yes |
| Material | Steel |
| Warranty | Lifetime Manufacturer Warranty |
Fitment is guaranteed or your money back plus free return shipping.
Don’t waste time installing a product that doesn't fit. We worked hard ensuring that this product is an exact fit on the vehicles listed below.
By
Terry S.
on
Verified Purchaser
I put these pipes on my 1997 Valkyrie GL1500C. They went on pretty easy the instructions were very clear and helpful. The pipes look great and sound amazing! Taking the stock pipes off and putting the Cobra exhaust on took a little over 2 hours by myself.
By
Kevin T.
on
Verified Purchaser
Pipes are beautiful. Easy to install. Make sure to use original Valkyrie brass exhaust seals only or exhaust studs will be too short.
By
JO
on
Verified Purchaser
1) Cobra pipes on my Valkyrie sound amazing 2) Parts Giant is outstanding 3) This is the second exhaust system I ordered from PG, the first being for my Magna.
By
Robert T.
on
Verified Purchaser
Nice pipes but the baffle screws either stripped out or twisted of trying to get them out, completely ruining one baffle having to drill another hole to remount it. A little disappointed in Cobras Quality!
By
James L.
on
Verified Purchaser
Great sound. Not too loud with baffles (never ran without baffles). Have rode many 300+ mile days and could still hear at the end!
By Motofreak on
Mellow while riding this exhausts wakes up when wacking open the throttle. The sound is amazing. The fitment is perfect and the pipes are not cheap looking. I preferred to twist the throttle rather than use my horn to let people know I’m there - it’s that much fun :)
How many stars would you give this product? Write a review.
By SMSGT Rick
Answer QuestionYes, absolutely. If you were to choose the 1997 Honda GL1500CT Valkyrie Tourer exhaust system from our fit guide, you'd receive all of the correct parts to fit your machine.
By Anon.
Answer QuestionYes, the Cobra exhaust system for the Honda Valkyrie does include both, left and right exhaust heat shields in the box. It's all chrome steel piping so they'll look good for a long time!
By Anon.
Answer QuestionIt would be recommended to install a jet kit to accommodate the more freely flowing exhaust. That way you don't have the bike popping or backfiring.
By buzz
Answer QuestionYes, this would be a complete exhaust system.
By Amber
Answer QuestionThese pipes have a great growl to them coming from the Honda six cylinder engine. You should be more than happy with the sound with baffles installed. Most customers that acquire a used Honda with these pipes that do not have baffles call to order the replacement baffles as they have quite the bark without them installed. I would suggest just leaving them in place, they are deigned to produce peak power and output with them installed. Keep in mind a jet kit is required for an installation such as these pipes on a carbureted model.
By Anon.
Answer QuestionThe exhaust is designed to make peak power and performance with the baffles installed. As long as you jet the carburetors to match it should not suffer much. It would loose some bottom end without any backpressure.
By frankie
Answer QuestionEach baffle is secured in position with a single screw which makes fitment and removal rather easy. Mind you, before installing these pipes, we highly recommend that you apply anti-seize to each baffle bolt so as to make it easy to remove them in the future! So long as you do that, it wouldn't be a problem to remove them later on should you decide these parts aren't loud enough.
By Anon.
Answer QuestionYes, the exhaust system will fit - but you will need to make a permanent modifications to the Cobra exhaust to get it to work. On one of the left primary header pipes, you'll notice that the Rivco Valkyrie centerstand will come into contact with the header on a portion of the square tubing. You'll need to mark that spot carefully. Then, using a ball peen hammer with a black of wood, make a dent that's a about 3/8" on that spot. The Valkyrie Rivco centerstand still may touch, so make adjustments accordingly.
By Anon.
Answer QuestionYes, this exhaust system comes with removable baffles.
By Goose
1999 honda Valkyrie
Answer QuestionWhile it's not required to re-jet your bike, if you want to get the best possible throttle response and engine power output, you'd certainly want to adjust fueling to go along with the exhaust. Basically, any time you change the way air gets into or out of the engine, you should adjust carburetion in order to get the most bang for your buck. This is especially true with a full exhaust system. You can get a perfectly matched jet kit in the form of the Cobra Carburetor Jet Kit. With that, you'll have everything you need to re-jet your bike perfectly.
By Al
I own a 2001 Honda Valkyrie Interstate.
Answer QuestionYes, Cobra exhausts that fit the standard Valkyrie will also fit the Interstate and Deluxe variants.
Have a question? Please ask our experts and customers who own this product.
