The 124" Power Package is the ideal combination of performance and savings to transform your Milwaukee 8 Harley Davidson without breaking the bank. Bump the M8 from a 107" power plant to that of a 124" killer as well as adding matched cams/cam plate/oil pump and everything else a high performance cam chest needs to reliably make big power.
Wrinkle Black Finish jugs
Bolt-on kit
No case machining required
4.250" bore
Forged pistons
11.1 compression ratio
Oil Pump and Cam Plate
Precision machined from billet aluminum
Passage plugs removable for servicing
Independent scavenge sections for flywheel cavity and cam chest
Debris screens in both scavenge pickups
Magnet in cam chest to help to stop debris from entering oil pump
Increased flow capacity on both feed and scavenge side
Pressure relief valve is adjustable with unit installed in engine
Pushrods
Quickee pushrods help to ease installation
Comes with pushrod tubes
Tappets
S&;S premium tappets
Hard-anodized, billet aluminum tappet cuffs
Tappet cuffs stronger than stock
Eliminate distortion
Improves tappet stability at higher RPMs
Cam
S&S 550CE cam specifically engineered for big bore application
Valve Springs
Performance valve springs suitable for up to .605" lift
High-performance conical single wire spring design
Includes top collars, keepers, and valve seals/bottom collars
All components made in the USA
Product Note:
Specification
Details
Bore
Varies (make selection above)
Color
Varies (make selection above)
Compression Ratio
11.1:1
Country of Origin
USA
Displacement
124CI
Drive Type
Chain Drive
Engine Type
Milwaukee Eight
Exhaust Duration
273.1 degrees front/277.8 degrees rear
Exhaust Lift
.232 in. front/.264 in. rear
Exhaust Lobe Center
106 degrees front/100.5 degrees rear
Exhaust Timing (Close)
30.5 degrees front/38.4 degrees rear
Exhaust Timing (Open)
62.5 degrees front/59.4 degrees rear
Finish
Varies (make selection above)
Intake Duration
218.9 degrees front/214.2 degrees rear
Intake Lift
.127 in. front/.099 in. rear
Intake Lobe Center
100 degrees front/104 degrees rear
Intake Timing (Close)
29.4 degrees front/31.1 degrees rear
Intake Timing (Open)
9.4 degrees front/3.1 degrees rear
Valve Lift
.550 in.
Warranty
Varies (make selection above)
Vehicle Fitment
Fitment is guaranteed or your money back plus free return shipping.
Don’t waste time installing a product that doesn't fit. We worked hard ensuring that this product is an exact fit on the vehicles listed below.
Installed this kit with 5.5 injectors and Cobra 2 into 1 and got 123 horsepower and 131 lbs of torque. This will set you back in your seat. You want power you got it.
How many stars would you give this product? Write a review.
I have aa 2017 Streetglide I have checked and found this part does fit my bike but I was wondering do I use the heads I currently have or do I need to purchase new heads separately
By Anon.
This 124" Milwaukee Eight Power Package does not require the purchase of an aftermarket cylinder head to complete the installation. It's totally optional based upon your needs. Here at PartsGiant.com Towers, we like to say that, since you've already got the engine torn down, you might as well add those heads too! After all, you're going for big power with this big bore kit, why not finish the job and avoid any future engine tear downs by adding a set of Milwaukee Eight performance engine heads to your order. :D
Verified Purchaser
